Shop
Showing 73–84 of 120 results
Filter-
Microcurrent Adhesive Electrodes (Pack of 30)
£12.95Product InformationTechnical Data
Conductive adhesive single gel electrodes with a foam backing | Non-latex | Superior quality ensures extended product life
Connection
3.5mm stainless steel snap connector
Dimensions
26mm
Contents
Contains 30 individual electrodes
Compatibility
Fully compatible with most makes of microcurrent equipment including; Goddess, Genie, Mediwave, Gezanne, Diana, Arasys, Phsio Med, Gym Form, Gym 8, Rejuvaslim, Perfector, Euroslim & Genie
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Microcurrent Facial Electrode
£34.96Product InformationTechnical Data
- Fit standard cotton wool buds into the tip
- Stainless steel and acetone resistant ABS plastic
Connection
4mm plug
Dimensions
130mm (L) 12mm (D) Handle
Compatibility
Suitable for Carlton Professional equipment
Guarantee
12 months parts & labour
Priced
Individually
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Microcurrent Lead (3.5mm)
£12.46Product InformationTechnical Data
3.5mm jack plug to 2 (2mm) pins
Material
Molded silicone plastic
Connection
Push-Fit
Dimensions
1.5m (L)
Compatibility
Fully compatible with; Genie, Mediwave, Gezanne, Diana, Arasys, Phsio Med, Gym Form, Gym 8, Rejuvaslim, Perfector, Euroslim & Genie
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Microdermabrasion Crystals 120 Gauge (2kg)
£32.95Product InformationTechnical Data
White Aluminum Oxide
Size
2Kg
Mesh Gauge
120 Grit size (Standard)
MSDS Data Sheets
Available on request
Suitable for
These are s an aftermarket product suitable for most makes of Microdermabrasion equipment including Carlton Professional | Silhouette | Depilex | Ellisons | Sorisa
Priced
2 Kg
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Multicare Ultrasonic Skin Cleansing & Lifting Device
£99.96Product InformationThe Multicare Ultrasonic cleanser is an advanced 3 in 1 treatment device suitable for deep cleansing and liftingProduct Features:
- Clogged pores
- Acne
- Oily skin
- Deep cleansing
- Skin tightening
- Skin infusion and nutrition
Programme (1)
Deep Cleansing
24,000 vibrations per second helps propel impurities to the skin surface and cause dead skin cells to become dislodged using desincrustation (+) ION technology. The ultrasonic deep skin cleanser is a more effective and less aggressive method of skin exfoliation than traditional facial treatments
Programme (2)
ION Deep Moisturizing & Nourishing
Deeply cleanses and gently exfoliates the epidermis with Iontophoresis (-) ION technology. This accelerates product absorption and extraction from the skin
Programme (3)
EMS Lifting & Toning
Gently lifts and tones the skin resulting in a firmer and more youthful complexion
Supplied with two ‘slip-on’ attachments for cleansing and gentle massage
How to use
This product includes full instructions and a detailed skincare and treatment plan prepared by a qualified therapist, to help you and your clients use the product more effectively and obtain the very best results in your clinic and at home.
What’s in the box:Â
- Ultrasonic Skin Cleanser Device
- Mains charger
- Comprehensive instructions
Technical Specification
- Power 3W
- Charging time 3 hours
- Operating time 15 mins
Add to WishlistAdd to Wishlist -
Multiklean Beauty Equipment Cleaner 750ml
£8.96Product InformationTechnical Data
A powerful cleaning product suitable for removing stubborn and sticky substances such as oils, grease, grime, tar, wax and fat
Dilution Ratio
Ready diluted – refillable bottle with dilution graduation printed on the side
How to use
- Light residue – spray on soiled areas and wipe with cloth or sponge
- Heavy residue – apply liberally, leave to dissolve for 5 minutes and then remove with a cloth or agitate with a non-abrasive cleaning pad
Where to use
- Most hard surfaces
- Unsuitable for use on brass and non-anodised metal – always test product on substrate before cleaning
MSDS Data Sheets
Available on request
Suitable for
General purpose product suitable for domestic and professional use
Priced
Individually
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Multiklean Beauty Equipment Cleaner Concentrate 5ltr
£29.96Product InformationTechnical Data
A powerful cleaning product suitable for removing stubborn and sticky substances such as oils, grease, grime, tar, wax and fat
Dilution Ratio
Dilute as required – recommend 40% solution to water
How to use
- Light residue – spray on soiled areas and wipe with cloth or sponge
- Heavy residue – apply liberally, leave to dissolve for 5 minutes and then remove with a cloth or agitate with a non-abrasive cleaning pad
Where to use
- Most hard surfaces
- Unsuitable for use on brass and non-anodised metal – always test product on substrate before cleaning
MSDS Data Sheets
Available on request
Suitable for
General purpose product suitable for domestic and professional use
Priced
Individually
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Multiklean Descaling Crystals 1.5kg
£19.96Product InformationTechnical Data
Industrial strength descaling crystals for removing hardened limescale., contamination and legionella from water boiling vessels. Only takes minutes to effectively descale and decontaminate equipment. Helps prevent limescale build-up and legionnaires through legionella found in contaminated water
Dilution Ratio
50ml crystals to 1 ltr water
How to use
Pour 50ml of descaling crystals into 1ltr of water and decant into water vessel to just below its maximum level. Run equipment until it begins to boil and then shut-down. Wait to cool and then remove vessel, pour down the sink and rinse out thoroughly
Where to use
A general purpose all-round descaling product for domestic and professional use
Effective against
Limescale and legionella
MSDS Data Sheets
Available on request
Suitability
General-purpose product suitable for domestic and professional use
Priced
Individually
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Multiklean Soak Box Cleaner
£19.96Product InformationTechnical Data
Plastic case with lift out tray
Dimensions
265mm (L) 140mm (W) 85mm (D)
Compatibility
Suitable for most small tools and instruments.
How to use
Fill to level line with Multiklean equipment cleaner (see ‘Cleaning & Hygiene’ Product Listing). Leave instruments to soak for at least a 30 minutes depending on the residue. Lift tray to allow liquid to drain, rinse with water and allow to dry
Box comes complete with printed label for recording liquid change cycles
Suitable for
Many application including; Hair & Beauty salons, clinics and nail bars etc.
How to use
Fill to level line with suitable cleaning solution and leave instruments to soak for at least a 30 minutes depending on residue. Lift tray to allow liquid to drain, rinse with water and allow to dry
Box comes complete with printed label for recording liquid change cycles
Suitability
Many application including; Hair & Beauty salons, clinics and nail bars etc.
Priced
Individually
Delivery
- UK and Ireland (2 – 3 days) – Parcel Force tracked and signed
- Overseas (7 – 14 days) – Parcel Force or other depending on the destination tracked and signed
Add to WishlistAdd to Wishlist -
Prestige Medical Autoclave 210001 Annual Service & Repairs (Non-Printer Model)
£195.95It’s essential that your Prestige Medical Autoclave is serviced on a annual basis, as over time the nature of heat and steam flowing through the system will gradually deteriorate the key components. These are essential to maintaining the optimum level of performance and reliability whilst extending the life of your machine.Add to WishlistAdd to Wishlist -
Prestige Medical Autoclave 21001 (126C) Refurbished
£399.95Product InformationTechnical Data:
- Operating Temperature 126C
- Cycling Time 11 minutes
Accessories
Tools Basket
Mains Cable
Operating Instructions
Warranty
12 months parts & labour
Suitability
Suitable for sterilising non-hollows including; Clinics, Salons, Cosmetology, School Science Labs
Accreditation
Multicare Professional is an accredited service provider and spares stockist for Prestige Medical Ltd and certified by the Pressure Systems Safety Regulations 2000:128. All pre-owned autoclaves are tested, inspected and certified according to the manufacturers original specification and include a twelve months parts & labour warranty.
Written Scheme of Examination
The ‘Written Scheme of Examination’ has been produced to satisfy Regulation 8 of the Pressure System Safety Regulations 2000
Service and Maintenance
Annual equipment servicing and certification is available for new and existing customers – contact the service department for full details 01625 322187
Stock required
We buy & sell new and refurbished Prestige Medical Autoclaves. If you are considering selling or part x your used equipment, contact us for the best prices for good condition units
Add to WishlistAdd to Wishlist -
Prestige Medical Autoclave 21001 Annual Service & Repairs (Printer Model)
£195.95Prestige Medical Autoclaves Annual Service & Repairs
Prestige 21001 (126c & 134c) Printer Model
It’s essential that your Prestige Medical Autoclave is serviced on a annual basis, as over time the nature of heat and steam flowing through the system will gradually deteriorate the key components. These are essential to maintaining the optimum level of performance and reliability whilst extending the life of your machine.
What’s included
- This service is for 126c and 134c Printer Models only
- High quality replacement parts & components
- Clean & Descale water vessel and key components
- Main Seals and Gasket replacement
- Recalibrate temperature control system to ensure optimum sterilising performance
- Certified by the Pressure Systems Safety Regulations 2000:128 Written Scheme of Examination
- Test Certificate
- PAT Tested
- 3 months parts warranty
- 12 months labour warranty
- Collection & delivery included in price
- Free packaging box provided if required
Additional charges may apply where damage or faults are found with the circuitry, pressure vessel, lid and pressure release valves.
Service Turnaround Period
We provide a rapid 3 day turnaround service from receiving it to dispatching it.
How to arrange your Service & Repair
This is a machine service, repair and refurbishment only and not the sale of a refurbished machine. Therefore you are required to post your machine to our Repair Centre following your service purchase online or contact us to arrange collection.
Repair Centre Address
Multicare Professional
3 Rayleigh Close
Macclesfield
Cheshire
SK10 4XS
Contact : 01625 322187
Email: service@multicareprofessional.com
Add to WishlistAdd to Wishlist






